FAQs

Some ISO file and certain motherboard combination may reset USB host controller and IODD-2541. IODD-2541 booting time is longer than iodd 2531(ZM-VE300). And an error may occur in booting. Please try one of the following solutions. 1. Change the setting to ODD-MODE 2. Downgrade to 51(XX) version from http://iodd.kr/wordpress/product/iodd-2541/ 3. Use external power source to [...]

The problem can be resolved with the following three methods. 1. If in DUAL-MODE, change to the CD-MODE. 2. Use external power source to USB cable (with USB Y-Cable) 3. If the PC have a built-in CD-ROM, remove that in the way of physical, or disable that in the BIOS

1. disconnect all other USB devices connected to your PC. 2. remove IODD cover. 3. press the tact switch on the PCB and hold, and connect USB. 4. wait for 3 second and release the switch. 5. run the firmware updater.

1. Initialize drive as MBR. 2. Format the first partition as NTFS or FAT32 or EXFAT. (There are two kinds of firmware, one for NTFS, the other for FAT32 and EXFAT) 3. Make '_iso' folder in root dir on first partition. 4. Copy *.iso or folder tree to the '_iso' folder. 5. Do safely removal. [...]

Q)The PC will boot before they enter a password in the IODD. A)Enter the BIOS mode before PIN input. After PIN input, reboot

Q)LCD display '1st partition' or 'unsupported partition' and can not be used any function A)There are two kinds of firmware, one for NTFS, the other for FAT32 and EXFAT.Format the first partition as NTFS or FAT32 or EXFAT, appropriately.

Q)How to unlock write protection in virtual drive (VHD) A)Change the mode of VHD according to VHD name ( example below ) filename.vhd => filename&D.vhd : dual mode filename.vhd => filename&DW.vhd : dual mode , write-enabled

Q)I want to change the password. Any way do you have? A)You can't change instantly your PIN. Therefore you must backup your data before change your PIN. 1. backup your data 2. remove encryption PIN. 3. set encryption PIN.